混炼方式对螺旋纳米碳纤维增强天然橡胶复合材料力学性能的影响

采用干法和湿法两种混炼工艺制备了螺旋纳米碳纤维(HCNFs)/炭黑(CB)/天然橡胶(NR)复合材料,通过扫描电镜、拉伸试验机和应变扫描仪分别对所制备复合材料的界面形貌、力学性能和Payne效应进行了测试分析,考察了混炼方式对复合材料宏观力学性能及Payne效应的影响。结果表明,与纯CB填料相比,在干湿两种混炼方式下,添加适量的HCNFs(1～6份)能提高HCNFs/CB/NR复合材料的300%定伸应力、扯断伸长率、拉伸强度和硬度。与干法混炼相比,湿法混炼能明显增强HCNFs/CB/NR复合材料的Payne效应,并提升在HCNFs高添加量(2～6份)条件下的拉伸强度和扯断伸长率,这主要源于湿法混炼能够有效改善HCNFs在橡胶基质中的分散性。     

Development of mobile miniature natural gas liquefiers

With increasing consumption of natural gas (NG), small NG reservoirs, such as coalbed methane and oil field associated gas, have recently drawn significant attention. Owing to their special characteristics (e.g., scattered distribution and small output), small-scale NG liquefiers are highly required. Similarly, the mixed refrigerant cycle (MRC) is suitable for small-scale liquefaction systems due to its moderate complexity and power consumption. In consideration of the above, this paper reviews the development of mobile miniature NG liquefiers in Technical Institute of Physics and Chemistry (TIPC), China. To effectively liquefy the scattered NG and overcome the drawbacks of existing technologies, three main improvements, i.e., low-pressure MRC process driven by oil-lubricated screw compressor, compact cold box with the new designed heat exchangers, and standardized equipment manufacturing and integrated process technology have been made. The development pattern of “rapid cluster application and flexible liquefaction center” has been eventually proposed. The small-scale NG liquefier developed by TIPC has reached a minimum liquefaction power consumption of about 0.35 kW·h/Nm³. It is suitable to exploit small remote gas reserves which can also be used in boil-off gas reliquefaction and distributed peak-shaving of pipe networks.     

Introducing four different branch structures in PET by reactive processing––A rheological investigation

Chain extension/branching by reactive processing is a well-known method to enhance the rheological properties of polymers. In this study, pyromellitic dianhydride, poly(glycolic acid), triglycidyl isocyanurate, and bisphenol A diglycidyl ether were used as chain extender/branching agents to produce branched Polyethylene terephthalate (PETs) with four different molecular structures. According to the linear rheological characterizations, the storage modulus and complex viscosity of modified PET samples enhanced significantly after branching. The shear viscosities of modified PET show a pronounced shear-thinning behavior and a remarkable increase at low frequencies, which can be an indication of the existence of long-chain branches (LCBs) in the molecular structure of polymer and broadening the molecular weight distribution. Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) analysis were used to investigate the effect of branching agents on the chemical structure and thermal properties of PET, respectively. DSC results show that higher amounts of LCBs lead to lower melting and crystallization temperatures.     

Fermented and malted millet products in Africa: Expedition from traditional/ethnic foods to industrial value-added products

With the prevalent food insecurity in Africa, there is a growing need to utilize the available crops to develop nutritious, affordable and palatable food for the populace. Millet is critical in this role, relative to its abundance in the continent and good nutritional composition. For ages, fermentation and malting have been traditionally used to transform millet into variety of produce. A paradigm shift has however occurred over the years, giving birth to new commercially available products. This review thus appraises and gives an overview of traditional and modern fermented and malted products. Although, millet has been diversified to several products, its major food uses are still restrained to traditional consumers and largely remains underutilized. Considering the potential embedded in this grain, it is important to explore this crop through the application of appropriate modern fermentation and malting technologies. This will ensure the availability of ready to eat (RTE) and ready to use (RTU) food products and to a large extent address the incessant food security challenges plaguing Africa.     

Influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings

This paper presents influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings. Eight 1/1.5‐scale steel eave columns were constructed and tested under low cyclic reversed loading, including 4 specimens with bracket set and 4 specimens without bracket set. Based on the analysis of the strain of the specimens, the failure modes of the specimens were obtained. In addition, the hysteresis loops, skeleton curves, degradations of stiffness and strength, ductility, and dissipation capacities of the specimens were analyzed. Bracket set changed the force transfer mechanisms and failure modes of the specimens and had a significant influence on the seismic performance of the specimens. Compared with the specimens without bracket set, the yielded and ultimate bearing capacities of the specimens with bracket set improved by 30.7% and 24.0%, respectively. And also, the stiffness of the specimens with bracket set at the yielded and ultimate points increased by 52.8% and 135.6%. The dissipation capacities of the specimens with bracket set were 2.12 times those of the specimens without bracket set at yielded load. However, the ductility of the specimens with bracket set slightly decreased by 8.5%. It was shown that the seismic performance of the specimens with bracket set was better than that of the specimens without bracket set. The work in this paper provides a basis for further theoretical study on the seismic performance of steel eave columns in Chinese traditional style buildings.     

从中西色彩观差异看中西方设计色彩的异与同

目的对中西方设计色彩差异进行理论分析。方法以中西色彩表达的文化差异为基础,通过对中西方色彩观的文化渊源进行比较分析,提炼出对中西传统色彩观的文化特点概括。结论通过对色彩在中西方建筑、服饰、装饰等设计中的运用案例进行分析,把握传统色彩观在历史空间中的演进与中西融合趋势,以求对21世纪全球语境下的现代设计色彩发展,提供基于中西传统色彩观特点比较分析基础上的把握。     

Modeling and Optimization for a Comprehensive Gas Processing Plant with Sensitivity Analysis and Economic Evaluation

Sweetening, dehydration, natural gas liquid (NGL) recovery, and sale gas compression are four major treatment stages for the general natural gas processing. Here, a comprehensive gas processing plant (CGPP) coupling sweetening, dehydration, NGL recovery, and compression subsystems have been conceptually designed, modeled, and optimized based on field data. The development includes four major stages of work: (i) CGPP process development with Aspen HYSYS simulator; (ii) sensitivity studies for all distillation columns involved in the CGPP process to optimize their performances; (iii) sizing of major equipment of the CGPP; and (iv) economic evaluations with Aspen process economic analyzer to calculate the expected capital and operating expenditures for the developed CGPP process. Valuable insights of natural gas monetization from the viewpoint of large-scale process system integration, modeling, and optimization are provided.     

Characteristics of polycarbosilanes produced under different synthetic conditions and their influence on SiC fibers: Part I

SiC fibers can be obtained by the spinning, curing, and heat treatment of polycarbosilane (PCS); however, the properties of the PCS precursor must be considered to set the correct spinning conditions. Although many studies have focused on the synthesis conditions, the characterization (in particular, the structural characteristics) of PCS fibers, and the polymer itself has limitations. In this study, PCS was prepared in two steps, and the growth of the polymer with respect to the reaction conditions was analyzed. We found that PCS is formed and grown by the rearrangement and subsequent condensation reactions of polydimethylsilane (PDMS). Further, fiber formation was affected by the reaction temperature, time, and pressure. Three types of PCS were obtained under different synthetic conditions, and they were all characterized. Regardless of the structural similarity of the PCS fibers (based on the spectroscopic analysis), the polymers showed different thermal and rheological properties. Our findings will be important in improving the production of PCS fibers (and subsequent SiC fibers) with finely controlled properties.     

传统文化电视节目的发展特点

传统文化电视节目在探索发展的过程中,选题逐渐聚焦中国风物人文,视野逐步向百姓生活延伸,立意兼顾文化内涵与百姓情感需求,编排制作节目内容与造型双发展。在此基础上,传统文化节目迎来更大的繁荣。